5334912 4937767 CUMMINS DIESEL ENGINE 4BT 6BT 5.9L FUEL TRANSFER PUMP 1106N-010

PRODUCT DESCRIPTION

HOW WE KNOW FUEL PUMP HAVE OR NOT?

To determine whether a fuel feed pump is working correctly, you can perform several checks and tests. Here are some methods you can use:

### 1. Visual Inspection
- **Check for leaks:** Look for any visible signs of fuel leakage around the pump and fuel lines.
- **Check the power supply:** Ensure the pump is receiving power by inspecting the electrical connections and fuses.

### 2. Listen for Operating Noise
- **Noise check:** Turn the ignition key to the "ON" position (without starting the engine). You should hear a humming or buzzing sound from the pump if it’s an electric fuel pump, indicating it is running.

### 3. Pressure Test
- **Fuel pressure gauge:** Connect a fuel pressure gauge to the fuel line. Turn on the ignition (without starting the engine) to see if the gauge registers the correct fuel pressure. Compare the reading to the manufacturer's specifications.
- **Observe pressure drop:** After turning off the ignition, observe if the pressure holds steady or drops significantly, which might indicate a leak or a faulty check valve in the pump.

### 4. Flow Test
- **Flow rate:** Disconnect the fuel line at the point where it enters the engine. Place the end of the fuel line in a container. Turn on the ignition (or manually activate the pump) to see if fuel flows out at a steady rate. Be careful to follow safety procedures to avoid spills and fire hazards.

### 5. Electrical Test
- **Voltage check:** Use a multimeter to check the voltage at the pump terminals. With the ignition on, the voltage should match the battery voltage.
- **Continuity test:** If the pump is not receiving power, check the continuity of the wiring and the condition of the relay and fuses.

### 6. Diagnostic Scan
- **OBD-II scanner:** For modern vehicles with an onboard diagnostic system, use an OBD-II scanner to check for any error codes related to the fuel system. The scanner can also provide real-time data on fuel pressure and pump operation.

### 7. Physical Inspection
- **Fuel filter:** Check the fuel filter for clogs, as a blocked filter can reduce fuel flow and pressure, giving the impression of a faulty pump.

### 8. Performance Symptoms
- **Engine performance:** Monitor engine performance for signs of fuel pump issues, such as difficulty starting, engine stalling, sputtering at high speeds, or loss of power under load.

### Safety Precautions
- **Safety gear:** Always wear appropriate safety gear, including gloves and eye protection, when working with fuel systems.
- **Ventilation:** Ensure you work in a well-ventilated area to avoid inhaling fumes.
- **No open flames:** Keep away from open flames or sparks to prevent fire hazards.

By following these steps, you can determine whether your fuel feed pump is functioning correctly. If any issues are identified, it might be necessary to repair or replace the pump.

RELATED PARTS:

PRODUCT SHOWS:

5.9L FUEL TRANSFER PUMP

4BT 6BT FUEL TRANSFER PUMP

1106N-010 FUEL TRANSFER PUMP

5334912 4937767 CUMMINS DIESEL ENGINE 4BT 6BT 5.9L FUEL TRANSFER PUMP 1106N-010 Images